大同大學校務資料庫管理系統

基本資料：

姓名：張敏興
Email：mhchang@ttu.edu.tw
單位系所/職稱：
機械工程學系教授

期刊論文：

1. A. C. Ruo, W. M. Yan, Min-Hsing Chang, T. F. Yang(2023). Thermal instability of a horizontal nanofluid layer in a porous medium with high porosity. Journal of Mechanics, 38, 643-658. SCIE(SCI)
2. Bo-Han Chen, Min-Hsing Chang, Chung-Yu Liao(2022). Fabrication of bimetallic PtPd nanowire electrocatalysts by centrifugal electrospinning method for proton exchange membrane fuel cell. International Journal of Hydrogen Energy, 47, 37531-3754. SCIE(SCI)
3. Min-Hsing Chang, An-Cheng Ruo(2022). Rayleigh–Bénard instability in nanofluids: effect of gravity settling. Journal of Fluid Mechanics, 950, A37. SCIE(SCI)
4. Wei-Hsin Chen, Yi-Wei Li, Min-Hsing Chang, Chih-Che Chueh, Veeramuthu Ashokkuma, Lip Huat Saw(2022). Operation and Multi-Objective Design Optimization of a Plate Heat Exchanger with Zigzag Flow Channel Geometry. Energies, 15, 8205. SCIE(SCI)
5. Y. F. Chang, C. Y. Wu, Min-Hsing Chang(2022). Fabrication of platinum-cobalt nanowires by centrifugal electrospinning as oxygen reduction catalyst for PEMFC. International Journal of Hydrogen Energy, (https://doi.org/10.1). SCIE(SCI)
6. W. H. Chen, J. S. Wang, Min-Hsing Chang, A. T. Hoang, S. S. Lam, E. E. Kwon, V. Ashokkumar(2022). Optimization of a vertical axis wind turbine with a deflector under unsteady wind conditions via Taguchi and neural network applications. Energy Conversion and Management, (254), 115209. SCIE(SCI)
7. W. H. Chen, Y. W. Li, C. C. Lin, M. H. Chang, A. Saravanakumar, L. H. Saw(2022). Multi-objective optimization design for pressure uniformity in a proton exchange membrane fuel cell stack. International Journal of Energy Research, (doi:10.1002/ er.8566), 1-17. SCIE(SCI)
8. A. C. Ruo, W. M. Yan, Min-Hsing Chang(2021). The onset of natural convection in a horizontal nanofluid layer heated from below. Heat Transfer, (50), 7764-7783. SCIE(SCI)
9. Wei-Hsin Chen, Zong-Lin Tsai, Min-Hsing Chang, Siming You, Pei-Chi Kuo(2021). Geometry optimization and pressure analysis of a proton exchange membrane fuel cell stack. International Journal o f Hydrogen Energy, (46), 16717-1673. SCIE(SCI)
10. Chao-Yang Huang, Min-Hsing Chang(2021). Fabrication of platinum nanowires by centrifugal electrospinning method for proton exchange membrane fuel cell. International Journal of Energy Research, (45), 12968-1297. SCIE(SCI)
11. W. H. Chen, J . S. Wang, Min-Hsing Chang, J. K. Mutuku, A. T. Hoang(2021). Efficiency improvement of a vertical axis wind turbine using a deflector optimized by Taguchi approach with modified additive method. Energy Conversion and Management, (245), 114609. SCIE(SCI)
12. Wei-Hsin Chen, Zong-Lin Tsai, Min-Hsing Chang, Tzu-Hsuan Hsu, Pei-Chi Kuo(2020). Flow field simulation and pressure drop modeling by a porous medium in PEM fuel cells. International Journal of Energy Research, 2021(https://doi.org/10.1), 1-15. SCIE(SCI)
13. Ting-Yueh Chang, Falin Chen, Min-Hsing Chang(2018). Three-dimensional stability analysis for a salt-finger convecting layer. Journal of Fluid Mechanics, 841, 636-653.
14. Jeng-Rung Jiang, Falin Chen, Min-Hsing Chang(2016). Application of Infinitesimal Fluid Element Approach to Analyze Contact Angle with Surfactant Effect. Journal of Multidisciplinary Engineering Science and Technology, 3(8), 5466-5470.
15. Jeng-Rung Jiang, Falin Chen, Min-Hsing Chang(2016). Young’s Equation for Non-planar Surfaces. INTERNATIONAL JOURNAL OF MECHANICS, 10, 326-328.
16. Che-Chia Fan, Min-Hsing Chang(2016). Improving proton exchange membrane fuel cell performance with carbon nanotubes as the material of cathode microporous layer. INTERNATIONAL JOURNAL OF ENERGY RESEARCH, 40, 181-188. SCIE(SCI)
17. Y. G. Su, F. Chen, C. Y. Wu, Min-Hsing Chang(2016). Effect of surface roughness of chill wheel on ribbon formation in theplanar flow casting process. Journal of Materials Processing Technology, 229, 609-613. SCIE(SCI)
18. Yu-Guang SU, Falin CHEN, Chung-Yung WU, Min-Hsing CHANG, Chih-Ang CHUNG(2015). Effects of Manufacturing Parameters in Planar Flow Casting Process on Ribbon Formation and Puddle Evolution of Fe–Si–B Alloy. ISIJ International, 55(11), 2383–2390. SCIE(SCI)
19. Sheng-Yan Lin, Min-Hsing Chang(2015). Effect of microporous layer composed of carbon nanotube and acetylene black on polymer electrolyte membrane fuel cell performance. International Journal of Hydrogen Energy, 40, 7879 - 788. SCIE(SCI)
20. Guan-Min Huang, Min-Hsing Chang(2014). Effect of Gas Diffusion Layer With Double-Side Microporous Layer Coating on Proton Exchange Membrane Fuel Cell Performance Under Different Air Inlet Relative Humidity. International Journal of Electrochemical Science, 9, 7819 - 783. SCIE(SCI)
21. YU-GUANG SU, FALIN CHEN, CHIA-MING CHANG, CHUNG-YUNG WU, MIN-HSING CHANG, C.A.CHUNG(2014). Tuning the Planar-Flow Melt-Spinning Process Subject to Operability Conditions. JOM, 66(7), 1277-1286. SCIE(SCI)
22. Ming-Tung Sung, Min-Hsing Chang, Ming-Hua Ho(2013). Investigation of cathode electrocatalysts composed of electrospun Pt nanowires and Pt/C for proton exchange membrane fuel cells. Journal of Power Sources, 249, 320-326. SCIE(SCI)
23. Hao-Ming Chang, Min-Hsing Chang(2013). Effect of Gas Diffusion Layer With Double-Side Microporous Layer Coating on Polymer Electrolyte Membrane Fuel Cell Performance. ASME Journal of Fuel Cell Science and Technology, 10, 021005. SCIE(SCI)
24. Chun-Ting Liu, Min-Hsing Chang(2013). Effects of Microporous Layer on PBI-based Proton Exchange Membrane Fuel Cell Performance. International Journal of Electrochemical Science, 8, 3687 - 369. SCIE(SCI)
25. Hong-Hua Chen, Min-Hsing Chang(2013). Effect of cathode microporous layer composition on proton exchange membrane fuel cell performance under different air inlet relative humidity. Journal of Power Sources, 232, 306-309. SCIE(SCI)
26. Cheng-Cheng Chiang, Min-Hsing Chang(2012). Characterization of a Membraneless Microfluidic Hydrogen/Air Fuel Cell. Journal of the Chinese Society of Mechanical Engineers, 33(5), 427~433. EI
27. An-Cheng Ruo, Kuan-Hung Chen, Min-Hsing Chang, Falin Chen(2012). Instability of a charged non-Newtonian liquid jet. PHYSICAL REVIEW E, 85, 016306. SCIE(SCI)
28. A. C. Ruo, F. Chen, C. A. Chung, M. H. Chang(2011). Three-dimensional response of unrelaxed tension to instability of viscoelastic jets. J. Fluid Mechanics, 682(2011), 558–576. SCIE(SCI)
29. M. H. Chang, A. C. Ruo, F. Chen, S. T. Chang(2011). The effect of Joule-heating-induced buoyancy on the electrohydrodynamic instability in a fluid layer with electrical conductivity gradient. Int. J. Heat and Mass Transfer, 54(2011), 3837–3845. SCIE(SCI)
30. H. M. Chang, C. W. Lin, M. H. Chang, H. R. Shiu, W. C. Chang, F. H. Tsau(2011). Optimization of polytetrafluoroethylene content in cathode gas diffusion layer by the evaluation of compression effect on the performance of a proton exchange membrane fuel cell. Journal of Power Sources, 196, 3773-3780. SCIE(SCI)
31. C. Y. Hsueh, H. S. Chu, W. M. Yan, C. H. Chen, M. H. Chang(2010). Numerical study of heat and mass transfer in the plate methanol steam micro-reformer channels. Applied Thermal Engineering, 30, 1426-1437. SCIE(SCI)
32. A. C. Ruo, M. H. Chang, F. Chen(2010). Electrohydrodynamic instability of a charged liquid jet in the presenceof an axial magnetic field. Physics of Fluids, 22, 044102. SCIE(SCI)
33. An-Cheng Ruo, Min-Hsing Chang, Falin Chen(2010). Effect of rotation on the electrohydrodynamic instability of a fluid layer with an electrical conductivity gradient. Physics of Fluids, 22, 024102. SCIE(SCI)
34. Falin Chen, Min-Hsing Chang, Chih-Yi Kuo, Ching-Yi Hsueh, We-Mon Yan(2009). Analysis of a Plate-Type Microreformer for Methanol Steam Reforming Reaction. Energy & Fuels, 23, 5092- 5098. SCIE(SCI)
35. MIN-HSING CHANG, AN-CHENG RUO, FALIN CHEN(2009). Electrohydrodynamic instability in a horizontal fluid layer with electrical conductivity gradient subject to a weak shear flow. J. Fluid Mech., 634, 191–215. SCIE(SCI)
36. H. C. Weng, C. K. Chen, M. H. Chang(2009). Stability of micropolar fluid flow between concentric rotating cylinders. J. Fluid Mech., 631, 343–362. SCIE(SCI)
37. Li-Ming Chu, Min-Hsing Chang, Jiann-Lin Chen, Jin-Yuan Lai(2009). Simulation and experimental measurement of flow field within an air cleaner of all-terrain vehicle. Journal of the Chinese Society of Mechanical Engineers, 30(2), 143~150. SCIE(SCI)
38. An-Cheng Ruo, Falin Chen, Min-Hsing Chang(2009). Linear instability of compound jets with nonaxisymmetric disturbances. PHYSICS OF FLUIDS, 21, 012101. SCIE(SCI)
39. An-Cheng Ruo, Min-Hsing Chang, Falin Chen(2008). On the nonaxisymmetric instability of round liquid jets. Physics of Fluids, 20, 062105. SCIE(SCI)
40. Li-Ming Chu, Min-Hsing Chang, Hsiang-Chen Hsu, Wen-Tung Chien, Chien-Heng Liu(2008). Simulation and Experimental Measurement of Flow Field within Four-Stroke motorcycle engines. Journal of the Chinese Society of Mechanical Engineers, 29(2), 149~ 158. EI
41. Falin Chen, Min-Hsing Chang, Hung-Yi Lin(2008). Analysis of a novel MEMS-based design of micro-direct methanol fuel cell. Journal of Power Sources, 178, 125-131. SCIE(SCI)
42.朱曉明、張敏興、楊榮華、賴晉圓（2006）。二行程引擎汽缸內流場數值模擬與量測。永達學報，7(1)，1-10。SCIE(SCI)
43.蘇育漢、張敏興（2003）。汽油噴射引擎感知器訊號對噴油時間的影響。永達學報，4(2)。

研討會論文

1.何冠樺、張敏興（2021）。應用旋轉靜電紡絲法製作氧化銅奈米纖維技術研究。第十六屆全國氫能與燃料電池學術研討會（頁 P-027）。R.O.C。
2.謝睿宇、王明興、張敏興（2021）。旋轉靜電紡絲法製造鉑釕奈米纖維技術研究與燃料電池應用性能測試分析。台灣機電工程國際學會第六屆全國學術研討會（頁 ISME091）。R.O.C。
3.吳鎮宇、張敏興（2020）。應用旋轉靜電紡絲法製造鉑鈷合金奈米纖維技術研究與性能測試分析。中國機械工程學會第三十七屆全國學術研討會（頁 #111）。R.O.C。
4. Guan-Hua He, Min-Hsing Chang(2019). Fabrication of CuO Nanowires by the Electro-forcespinning Method. The International Conference on Sustainable Energy and Green Technology (SEGT) 2019. Thailand.
5. Min-Hsing Chang(2019). A revised model for the effect of thermophoresis on the onset of convection in a horizontal nanoflui. 8th International Symposium on Bifurcations and Instabilities in Fluid Dynamics. Ireland.
6. Jain-Yu Chen, Min-Hsing Chang(2019). Fabrication of Palladium Nanowires by Centrifugal Electrospinning Method as Electrocatalyst for Low . 25th Topical Meeting of the International Society of Electrochemistry: New electrochemical processes. Spain.
7.陳柏翰、張敏興（2019）。應用旋轉靜電紡絲法製造鉑鈀奈米纖維技術研究與性能測試分析。中國機械工程學會第36屆全國學術研討會R.O.C。
8. Huang-Chun Yu, Min-Hsing Chang(2014). Preparation of Electrospun Polyacrylonitrile-based Carbon Nanofibers as Pt Catalyst Support and Its Application in a PEM Fuel Cell. 65th Annual Meeting of the International Society of Electrochemistry. Switzerland.
9. Sheng-Yan Lin, Min-Hsing Chang(2014). EFFECT OF MICROPOROUS LAYER COMPOSED OF CARBON NANOTUBE AND ACETYLENE BLACK ON POLYMER ELECTROLYTE MEMBRANE FUEL CELL PERFORMANCE. 13th International Conference on Clean Energy. Turkey.
10. C. Y. Chuang, Min-Hsing Chang(2014). Optimal synthesizing ratio of Pt/CNT and Nafion content in the cathode catalyst layer of a PEM fuel cell. 2014 Energy Material Nanotechnology (EMN) East Meeting. Mainland China.
11. Y. H. Hung, Min-Hsing Chang(2013). Application of carbon nanotubes as Pt support in cathode catalyst layer and performance analysis for a proton exchange membrane fuel cell. 3rd International Colloids Conference: Colloids & Energy. Mainland China.

基本資料：

期刊論文：

研討會論文

專書