基本資料：

  • 姓名：林永仁
  • Email：yjlin@ttu.edu.tw
  • 單位系所/職稱：
  • 材料工程學系 教授
  • 機械與材料工程學系 講座教授

期刊論文：

  • 1.李其鴻、鍾佑祥、楊智富、林永仁、張鈞富（2019）。以熱處理改良擠壓鑄造之A356鋁合金及A356/SiC複合材料之導熱性質。鑄造工程學刊，45(3)，1 - 12。
  • 2. Yung-Jen Lin, Sea-Fue Wang, Bo-Cheng Lai, Hong-Bo Yang, Jia-Min Chen(2019). Microwave Dielectric Properties of Ca4(La4Pr2)(SiO4)4(PO4)2O2 Ceramics Doped with Isovalent and Alio. Journal of Electronic Materials, 48(10), 6421–6430. SSCI
  • 3. Yung-Jen Lin, Sea-Fue Wang, Bo-Cheng Lai, Yi-Xin Liu, Ya-Ling Chang, Jer-Ren Yang(2017). Densification, microstructure evolution, and microwave dielectric properties of Mg1-xCaxZrTa2O8 ceramics. Journal of the European Ceramic Society, 37(8), 2825–2831. SCIE(SCI)
  • 4. Yung-Jen Lin, Sea-Fue Wang, Ssu-Hao Chen, Yi-Le Liao, Cheng-Long Tsai(2015). Microwave dielectric properties of (Ba1−xSrx)(Mg0.5W0.5)O3 ceramics. Ceramics International, 2015. SCIE(SCI)
  • 5.陳建忠、林永仁（2015）。應用網路層級分析法探討具設計彈性新產品開發之關鍵成功因素-以A科技公司為例。管理資訊計算(Management, Information, Computing)，2015。
  • 6.杜雅蘭、林永仁（2013）。設計失效模式影響分析結合德菲法應用於機上盒之研究。管理資訊計算(Management, Information, Computing)，2013。
  • 7.陳適鴻、林永仁（2013）。新產品開發跨職能團隊的成功關鍵因素研究－以A科技公司為例。管理資訊計算(Management Information Computing)，2013。
  • 8. Yung-Jen Lin, Xiao-Wen Lo(2011). Fabrication of SiC and SiC/ aluminum-silicon Composites from Rattan Charcoal. Key Engineering Materials, 479, 119-123. EI
  • 9. Yung-Jen Lin, Shin-Hua Tu(2009). Joining of Mullite Ceramics with Yttrium Aluminosilicate Glass Interlayers. Ceramics International, 35(3), 1311-1315. SCIE(SCI)
  • 10. Yung-Jen Lin, Shin-Yi Shen(2007). Fabrication of Alumina and Silicon Carbide Fibers from Carbon Fibers. Materials Science Forum, 561-565, 603-606. EI
  • 11. Yung-Jen Lin, Shi-Yi Lin(2007). Fabrication of Ceramic-metal Composites by Melt Infiltration of Moso-bamboo-derived Porous SiC. Key Engineering Materials, 351, 37-42. EI
  • 12. Yung-Jen Lin, Chih-Ming Chuang(2007). The effects of transition metals on carbothermal synthesis of beta-SiC powder. Ceramics International, 33(5), 779-784. SCIE(SCI)/EI
  • 13. Yung-Jen Lin, Li-Bin Chang(2006). Alumina/Glass Composites Fabricated by Melt-Infiltration of Glass into Porous Alumina.. Key Engineering Materials, 313, 129-138. SCIE(SCI)/EI
  • 14. Yung-Jen Lin, Yi-Hsiang Chiu(2006). Fabrication of Silicon Carbide From Bamboo Carbon Templates. Ceramic Transactions, v 195, Novel Processing of Ceramics and Composites, 195, 45-55.
  • 15. Yung-Jen Lin, Tsung-Hsien Shen(2003). Pressureless Infiltration of porous Al2O3/Ni Compacts with 6061 Al Alloy. Key Engineering Materials, 249, 37-44. SCIE(SCI)/EI
  • 16. Yung-Jen Lin, Chia-Ping Tseng(2003). Fabrication of Mullite/SiC and Mullite/Zirconia/SiC Nanocomposites by “Dual” In-situ Reaction Syntheses.. Materials Science and Engineering A, 344, 168-174. SCIE(SCI)/EI
  • 17. Yung-Jen Lin, Chia-Ping Tseng(2003). The Effects of the Starting Precursors on the Carbothermal Synthesis of SiC Powders. Ceramic International, 29, 69-75. SCIE(SCI)/EI
  • 18. Yung-Jen Lin, Yi-Chi Chen(2001). Fabrication of Mullite Composites by Cyclic Infiltration and Reaction Sinteirng. Mater. Sci. and Eng. A., 298, 179-186. SCIE(SCI)/EI
  • 19. Yung-Jen Lin, Yi-Chi Chen(2001). Cyclic Infiltration of Porous Zirconia Preforms with a Liquid Solution of Mullite Precursor. J. of Am. Ceram. Soc., 84, 71-78. SCIE(SCI)/EI
  • 20. Yung-Jen Lin, Lee-Jen Chen(2000). Oxidation of SiC Powders in SiC/Alumina/Zirconia Compacts. Ceramics International, 26, 593-598. SCIE(SCI)/EI
  • 21. Yung-Jen Lin, Lee-Jen Chen(1999). Reaction Synthesis of Mullite-Silicon Carbide-Yttria Stabilized Zirconia Composites. Journal of Materials Research, 14, 3949-3956. SCIE(SCI)/EI
  • 22. Yung-Jen Lin, Yi-Chi Chen(1999). Fabrication of Zirconia-Mullite Composites by Liquid Infiltration.. proceedings of Processing and Fabrication of Advanced Materials, 1999, 453-461.
  • 23. Yung-Jen Lin(1999). Reaction Synthesis of Mullite-Zirconia from Mixtures of Alumina, Silica and 3 mol% Yttria-Zirconia Powders. Journal of Materials Research, 14, 916-924. SCIE(SCI)/EI
  • 24. Yung-Jen Lin, Li-Jen Chen(1998). The Oxidation of Silicon Carbide Powder,（碳化矽粉末的氧化行為）. J. of the Ceram. Soc. (Taiwan)(陶業學刊), 2, 42-50.
  • 25. Yung-Jen Lin, Bor-Feng Jiang(1998). Sintering and Phase Evolution of Electroless-Nickel-Coated Alumina Composite Powder. J. Am. Ceram. Soc., 81. SCIE(SCI)/EI
  • 26. Yung-Jen Lin, Ching-Jiunn Wu(1997). The Properties of Antimony-doped Tin Oxide Thin Films from Sol-gel Process. Surface and Coating Technology, 88, 239-247. SCIE(SCI)/EI
  • 27.林永仁、張書瑜、江柏風（1996）。無電鍍鎳氧化鋁複合粉末的製作及燒結性質。Tatung Journal，26(1996)，343-349。
  • 28.吳慶俊、林永仁（1995）。以化學溶液法配製氧化錫粉末。Tatung Journal，25(1995)，337-344。
  • 29. 15. Michael D. Sacks, Yung-Jen Lin, Gary W. Scheiffele, Keyun Wang, Nazim Bozkurt(1995). Effect of Seeding on Phase Development, Densification Behavior, and Microstructure Evolution in Mullite Fabricated from Microcomposite Particles. J. of Am. Ceram. Soc., 78, 2897-906. SCIE(SCI)/EI
  • 30. Yung-Jen lin, Chao-Chia Chang(1994). The Effects of Sintering Time and Temperature on the Densification and Phase Evolution of Mullite-30 vol%(3 mol% Yttria-Zirconia). Tatung Journal, 24(1994), 133-141.
  • 31. Yung-Jen Lin, Kuan-Chieh Su(1994). Synthesis of Mullite Composites from Powder Mixtures of Alumina, Silica, and Zirconia.. Advances in Ceramic-Matrix Composites II, 46, 367-378.
  • 32. Yung-Jen Lin, Peter Angelini, Martha L. Mecartney(1990). Microstructural and Chemical Influences of Silicate Grain-Boundary Phases in Yttria-Stabilized Zirconia. J. Am. Ceram. Soc., 73, 2728-35. SCIE(SCI)/EI

研討會論文

  • 1.呂子豪、林永仁（2021）。鈍化PU模板支柱對多孔陶瓷壓縮強度影響之研究。2021年台灣陶瓷學會年會暨科技部專題研究計畫成果發表會R.O.C。
  • 2. Yi-Hsiang Lai, Yung-Jen Lin(2021). Processing and performance of oxidation-resistant layers on graphite. 2021 Materials Research Society-Taiwan International Conference (2021 MRSTIC). R.O.C.
  • 3. Yung-Jen Lin, Bo-Cheng Lai(2015). Microwave Dielectric Properties of MgZrTa2O8-based Ceramics. 11th Pacific Rim Conference of Ceramic Societies (PACRIM 11). Republic of Korea.
  • 4. Y-J Lin, S-F Wang, B-H Tung(2014). The Study of Microwave Properties of Re4(La4Pr2)(SiO4)6O2 (Re = Mg, Ca, Sr, Ba). International Conference on Electronic Materials 2014 (IUMRS-ICEM 2014). R.O.C.
  • 5. Tsung -Yeh Yang, Yung-Jen Lin, Hsin-Hsien Li(2013). Processing of Al/SiC Composites for Heat Sink Applications. 7th International Conference on Materials for Advanced Technologies (ICMAT 2013). United States of America.
  • 6. Yung-Jen Lin(2009). Silicon carbide synthesized from plants and its potential applications. E-MRS 2009 Fall Meeting, Warsaw, Poland. Poland.
  • 7. Y. Lin, S. Chien(2009). Porous SiC Fabricate from Luffa Cylindrica and Its Application as Ni-catalyst Supports. 8th Pacific Rim Conference on Ceramic and Glass Technology (PacRim 8), Vancouver, Canada. Canada.
  • 8. Yung-Yu Chen, Yung-Jen Lin, Chia-Hao Yang, Cheng-Wei Lin, Yao-Li Cheng(2009). Mechanical Properties of Aluminum-doped Zinc Oxide Transparent Conducting Films Prepared by Sol-gel Process. IDMC/3DSA/Asia Display 2009. R.O.C.
  • 9.(2008). Fabrication of SiC and SiC/ aluminum-silicon composites from rattan charcoal. 第四屆海峽兩岸工程材料研討會，中國 南寧. Mainland China.
  • 10.(2007). The processing and properties of Al-doped ZnO thin film with dispersion of fine Au and Ag particles. 中國顆粒學會超微顆粒專業委員會第五屆年會暨海峽兩岸納米顆粒學術研討會. Mainland China.
  • 11. Yung-Jen Lin(2006). Fabrication of Ceramic-metal Composites by Melt Infiltration of Moso-bamboo-derived Porous SiC. 第五屆海峽兩岸複合材料研討會. Mainland China.
  • 12. Yung-Jen Lin, Yi-Hsiang Chiu(2005). Fabrication of Silicon Carbide from Bamboo Carbon Templates. The 6th Pacific Rim Conference on Ceramic and Glass Technology. United States of America.
  • 13. Yung-Jen Lin(2005). Joining of Mullite Ceramics with Yttrium Aluminosilicate Glass Interlayer. The American Ceramic Society, 107th Annual Meeting, Exposition, & Technology Fair. United States of America.
  • 14. Yung-Jen Lin, Li-Bin Chang(2005). Alumina/Glass Composites Fabricated by Melt-infiltration of Glass into Porous Alumina. 第四屆海峽兩岸複合材料研討會. R.O.C.
  • 15. Yung-Jen Lin, Guo-Shun Yang(2004). The Electrochemical Properties of LiNi0.8Co0.2O2 Synthesized from Hydroxide Precursors precipitated at Different pH. 12th International Meeting on Lithium Batteries. Japan.
  • 16. Yung-Jen Lin, Tsung-Hsien Shen(2003). Pressureless Infiltration of porous Al2O3/Ni Compacts with 6061 Al Alloy. 第三屆海峽兩岸複合材料研討會. Mainland China.
  • 17. Yung-Jen Lin, Nai-Jung Chen(2003). The Effects of Cooling Conditions on the Properties of Lithium Manganese Spinels. the 204th Meeting of The Electrochemical Society. United States of America.
  • 18. K. Wang, Y.J. Lin, G.W. Scheiffele, N. Bozkurt, M.D. Sacks(1996). Mullite Formation by Reaction of (alpha-Alumina/Silica) Microcomposite Particles. Annual meeting of The American Ceramic Society. United States of America.
  • 19. Y.J. Lin(1995). Pressureless Joining of Advanced Ceramics with Glass Powders. Annual meeting of The American Ceramic Society, Cininnati, OH. United States of America.
  • 20. M.D.Sacks, Y.J. Lin, N. Bozkurt, G.W. Scheiffele, K. Wang(1994). Effect of Seed Particle Additions on Transient Viscous Sintering of Mullite and Mullite/SiC Composites. Annual meeting of The American Ceramic Society, Indiannapolis, IN. United States of America.
  • 21. M.D. Sacks, G.W. Scheiffele, N. Bozkurt, Y.J. Lin(1992). Fabrication of Mullite Matrix Composites by Transient Viscous Sintering. Annual meeting of The American Ceramic Society, Minneapolis, MN. United States of America.

專書